commit 1537441bb1be1fa77a42e5317de02aa3efc66a06 Author: Mickaël TANSORIER Date: Wed Feb 24 22:55:55 2016 +0100 Initial commit Creation project IR Receptor diff --git a/IR-Receptor-main.c b/IR-Receptor-main.c new file mode 100644 index 0000000..e2cf5b6 --- /dev/null +++ b/IR-Receptor-main.c @@ -0,0 +1,152 @@ +/* + * File: main_IR_Receptor.c + * Author: micka + * + * Created on 9 mars 2015, 17:03 + * + * License CC-BY-NC-SA + * https://creativecommons.org/licenses/by-nc-sa/3.0/fr/ + * + */ + +/* CONFIGURATION */ +#pragma config CP = OFF // Flash Program Memory Code Protection bit (Code protection off) +#pragma config CCPMX = RB3 // CCP1 Pin Selection bit +#pragma config DEBUG = OFF // In-Circuit Debugger Mode bit +#pragma config WRT = OFF // Flash Program Memory Write Enable bits +#pragma config CPD = OFF // Data EE Memory Code Protection bit (Data memory code protection off) +#pragma config LVP = OFF // Low-Voltage Programming Enable bit (RB4/PGM pin has PGM function, low-voltage programming enabled) +#pragma config BOREN = ON // Brown-out Detect Enable bit (BOD enabled) +#pragma config MCLRE = OFF // RA5/MCLR/VPP Pin Function Select bit (RA5/MCLR/VPP pin function is MCLR) +#pragma config PWRTE = OFF // Power-up Timer Enable bit (PWRT disabled) +#pragma config WDTE = OFF // Watchdog Timer Enable bit (WDT disabled) +#pragma config FOSC = INTOSCIO + +#define _XTAL_FREQ 8000000 // set your internal(or)external oscillator speed + +#include +#include +#include + +/* Alias */ +#define RECEP PORTAbits.RA1 +#define OUT1 PORTAbits.RA2 +#define OUT2 PORTAbits.RA3 +#define RED1 PORTBbits.RB2 +#define GREEN1 PORTBbits.RB3 +#define RED2 PORTBbits.RB5 +#define GREEN2 PORTBbits.RB4 + +/* FONCTIONS */ +void init_oscillator (void); +unsigned change_out (unsigned OUT); +void init_code (unsigned *code); + +/* + * MAIN + */ +void main(void) { + + init_oscillator(); + + TRISAbits.TRISA1 = 1; //input of IR recepter + TRISAbits.TRISA2 = 0; //output led + TRISAbits.TRISA3 = 0; //output led + + TRISB = 0; + TRISAbits.TRISA4 = 0; //output led + + unsigned signal_precedent = 1; + + unsigned code[8]; + + /* set code to 0 */ + init_code(code); + + /* set outpu to 0 */ + OUT1 = 0; + OUT2 = 0; + GREEN1 = 0;RED1 = 1; + GREEN2 = 0;RED2 = 1; + + while(1) + { + + /* code: 01010101 -> reception: 10101010 */ + if( code[0]==1 && code[1]==0 && code[2]==1 && code[3]==0 && code[4]==1 && code[5]==0 && code[6]==1 && code[7]==0 ){ + OUT1 = change_out(OUT1); + if( OUT1==1 ){GREEN1=1;RED1=0;}else{GREEN1=0;RED1=1;} + init_code(code); + } + /* code: 00011000 -> reception: 11100111 */ + else if( code[0]==1 && code[1]==1 && code[2]==1 && code[3]==0 && code[4]==0 && code[5]==1 && code[6]==1 && code[7]==1 ){ + OUT2 = change_out(OUT2); + if( OUT2==1 ){ GREEN2=1;RED2=0; }else{ GREEN2=0;RED2=1; } + init_code(code); + } + + + if( RECEP==0 ){ + __delay_ms(10); + if( RECEP==0 && signal_precedent==1 ){ + __delay_ms(1); + __delay_us(500); // delay to be at the midle + + code[0] = RECEP; + __delay_ms(1); + code[1] = RECEP; + __delay_ms(1); + code[2] = RECEP; + __delay_ms(1); + code[3] = RECEP; + __delay_ms(1); + code[4] = RECEP; + __delay_ms(1); + code[5] = RECEP; + __delay_ms(1); + code[6] = RECEP; + __delay_ms(1); + code[7] = RECEP; + + signal_precedent = 0; + + PORTAbits.RA4 = change_out(PORTAbits.RA4); + } + else{} + } + else{ signal_precedent=1; } + + + } +} + +/* + * Init frenquency + */ +void init_oscillator(void){ + OSCCONbits.IRCF = 0b111; //8MHz + OSCCONbits.SCS = 0b00; //Oscillator mode defined by FOSC + OSCCONbits.IOFS = 1; //Frequency is stable +} + +/* + * Change out signal + */ +unsigned change_out(unsigned OUT){ + if( OUT==1 ) return 0; + else return 1; +} + +/* + * Set code to default: 00000000 + */ +void init_code(unsigned *code){ + code[0] = 0; + code[1] = 0; + code[2] = 0; + code[3] = 0; + code[4] = 0; + code[5] = 0; + code[6] = 0; + code[7] = 0; +} diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..fca8e2c --- /dev/null +++ b/Makefile @@ -0,0 +1,113 @@ +# +# There exist several targets which are by default empty and which can be +# used for execution of your targets. These targets are usually executed +# before and after some main targets. They are: +# +# .build-pre: called before 'build' target +# .build-post: called after 'build' target +# .clean-pre: called before 'clean' target +# .clean-post: called after 'clean' target +# .clobber-pre: called before 'clobber' target +# .clobber-post: called after 'clobber' target +# .all-pre: called before 'all' target +# .all-post: called after 'all' target +# .help-pre: called before 'help' target +# .help-post: called after 'help' target +# +# Targets beginning with '.' are not intended to be called on their own. +# +# Main targets can be executed directly, and they are: +# +# build build a specific configuration +# clean remove built files from a configuration +# clobber remove all built files +# all build all configurations +# help print help mesage +# +# Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and +# .help-impl are implemented in nbproject/makefile-impl.mk. +# +# Available make variables: +# +# CND_BASEDIR base directory for relative paths +# CND_DISTDIR default top distribution directory (build artifacts) +# CND_BUILDDIR default top build directory (object files, ...) +# CONF name of current configuration +# CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration) +# CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration) +# CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration) +# CND_PACKAGE_DIR_${CONF} directory of package (current configuration) +# CND_PACKAGE_NAME_${CONF} name of package (current configuration) +# CND_PACKAGE_PATH_${CONF} path to package (current configuration) +# +# NOCDDL + + +# Environment +MKDIR=mkdir +CP=cp +CCADMIN=CCadmin +RANLIB=ranlib + + +# build +build: .build-post + +.build-pre: +# Add your pre 'build' code here... + +.build-post: .build-impl +# Add your post 'build' code here... + + +# clean +clean: .clean-post + +.clean-pre: +# Add your pre 'clean' code here... +# WARNING: the IDE does not call this target since it takes a long time to +# simply run make. Instead, the IDE removes the configuration directories +# under build and dist directly without calling make. +# This target is left here so people can do a clean when running a clean +# outside the IDE. + +.clean-post: .clean-impl +# Add your post 'clean' code here... + + +# clobber +clobber: .clobber-post + +.clobber-pre: +# Add your pre 'clobber' code here... + +.clobber-post: .clobber-impl +# Add your post 'clobber' code here... + + +# all +all: .all-post + +.all-pre: +# Add your pre 'all' code here... + +.all-post: .all-impl +# Add your post 'all' code here... + + +# help +help: .help-post + +.help-pre: +# Add your pre 'help' code here... + +.help-post: .help-impl +# Add your post 'help' code here... + + + +# include project implementation makefile +include nbproject/Makefile-impl.mk + +# include project make variables +include nbproject/Makefile-variables.mk diff --git a/README.md b/README.md new file mode 100644 index 0000000..956c5da --- /dev/null +++ b/README.md @@ -0,0 +1,5 @@ + +This is an MPLAB project to PIC16F87. You should use MPLAB to compile it. + +License CC-BY-NC-SA https://creativecommons.org/licenses/by-nc-sa/3.0/fr/ + diff --git a/nbproject/Makefile-default.mk b/nbproject/Makefile-default.mk new file mode 100644 index 0000000..649df23 --- /dev/null +++ b/nbproject/Makefile-default.mk @@ -0,0 +1,127 @@ +# +# Generated Makefile - do not edit! +# +# Edit the Makefile in the project folder instead (../Makefile). Each target +# has a -pre and a -post target defined where you can add customized code. +# +# This makefile implements configuration specific macros and targets. + + +# Include project Makefile +ifeq "${IGNORE_LOCAL}" "TRUE" +# do not include local makefile. User is passing all local related variables already +else +include Makefile +# Include makefile containing local settings +ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk" +include nbproject/Makefile-local-default.mk +endif +endif + +# Environment +MKDIR=mkdir -p +RM=rm -f +MV=mv +CP=cp + +# Macros +CND_CONF=default +ifeq ($(TYPE_IMAGE), DEBUG_RUN) +IMAGE_TYPE=debug +OUTPUT_SUFFIX=elf +DEBUGGABLE_SUFFIX=elf +FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} +else +IMAGE_TYPE=production +OUTPUT_SUFFIX=hex +DEBUGGABLE_SUFFIX=elf +FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} +endif + +# Object Directory +OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE} + +# Distribution Directory +DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE} + +# Source Files Quoted if spaced +SOURCEFILES_QUOTED_IF_SPACED= + +# Object Files Quoted if spaced +OBJECTFILES_QUOTED_IF_SPACED= +POSSIBLE_DEPFILES= + +# Object Files +OBJECTFILES= + +# Source Files +SOURCEFILES= + + +CFLAGS= +ASFLAGS= +LDLIBSOPTIONS= + +############# Tool locations ########################################## +# If you copy a project from one host to another, the path where the # +# compiler is installed may be different. # +# If you open this project with MPLAB X in the new host, this # +# makefile will be regenerated and the paths will be corrected. # +####################################################################### +# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build +FIXDEPS=fixDeps + +.build-conf: ${BUILD_SUBPROJECTS} +ifneq ($(INFORMATION_MESSAGE), ) + @echo $(INFORMATION_MESSAGE) +endif + ${MAKE} -f nbproject/Makefile-default.mk dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} + +MP_PROCESSOR_OPTION=16F87 +# ------------------------------------------------------------------------------------ +# Rules for buildStep: compile +ifeq ($(TYPE_IMAGE), DEBUG_RUN) +else +endif + +# ------------------------------------------------------------------------------------ +# Rules for buildStep: assemble +ifeq ($(TYPE_IMAGE), DEBUG_RUN) +else +endif + +# ------------------------------------------------------------------------------------ +# Rules for buildStep: link +ifeq ($(TYPE_IMAGE), DEBUG_RUN) +dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} + ${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G -mdist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.map -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=-3 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,-osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" --memorysummary dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml -odist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} + @${RM} dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.hex + +else +dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} + ${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G -mdist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.map --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=-3 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,-osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" --memorysummary dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml -odist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} + +endif + + +# Subprojects +.build-subprojects: + + +# Subprojects +.clean-subprojects: + +# Clean Targets +.clean-conf: ${CLEAN_SUBPROJECTS} + ${RM} -r build/default + ${RM} -r dist/default + +# Enable dependency checking +.dep.inc: .depcheck-impl + +DEPFILES=$(shell "${PATH_TO_IDE_BIN}"mplabwildcard ${POSSIBLE_DEPFILES}) +ifneq (${DEPFILES},) +include ${DEPFILES} +endif diff --git a/nbproject/Makefile-impl.mk b/nbproject/Makefile-impl.mk new file mode 100644 index 0000000..47c4d1c --- /dev/null +++ b/nbproject/Makefile-impl.mk @@ -0,0 +1,69 @@ +# +# Generated Makefile - do not edit! +# +# Edit the Makefile in the project folder instead (../Makefile). Each target +# has a pre- and a post- target defined where you can add customization code. +# +# This makefile implements macros and targets common to all configurations. +# +# NOCDDL + + +# Building and Cleaning subprojects are done by default, but can be controlled with the SUB +# macro. If SUB=no, subprojects will not be built or cleaned. The following macro +# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf +# and .clean-reqprojects-conf unless SUB has the value 'no' +SUB_no=NO +SUBPROJECTS=${SUB_${SUB}} +BUILD_SUBPROJECTS_=.build-subprojects +BUILD_SUBPROJECTS_NO= +BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}} +CLEAN_SUBPROJECTS_=.clean-subprojects +CLEAN_SUBPROJECTS_NO= +CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}} + + +# Project Name +PROJECTNAME=IR-Receptor.X + +# Active Configuration +DEFAULTCONF=default +CONF=${DEFAULTCONF} + +# All Configurations +ALLCONFS=default + + +# build +.build-impl: .build-pre + ${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf + + +# clean +.clean-impl: .clean-pre + ${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf + +# clobber +.clobber-impl: .clobber-pre .depcheck-impl + ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean + + + +# all +.all-impl: .all-pre .depcheck-impl + ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build + + + +# dependency checking support +.depcheck-impl: +# @echo "# This code depends on make tool being used" >.dep.inc +# @if [ -n "${MAKE_VERSION}" ]; then \ +# echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \ +# echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \ +# echo "include \$${DEPFILES}" >>.dep.inc; \ +# echo "endif" >>.dep.inc; \ +# else \ +# echo ".KEEP_STATE:" >>.dep.inc; \ +# echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \ +# fi diff --git a/nbproject/Makefile-local-default.mk b/nbproject/Makefile-local-default.mk new file mode 100644 index 0000000..1d24bc8 --- /dev/null +++ b/nbproject/Makefile-local-default.mk @@ -0,0 +1,36 @@ +# +# Generated Makefile - do not edit! +# +# +# This file contains information about the location of compilers and other tools. +# If you commmit this file into your revision control server, you will be able to +# to checkout the project and build it from the command line with make. However, +# if more than one person works on the same project, then this file might show +# conflicts since different users are bound to have compilers in different places. +# In that case you might choose to not commit this file and let MPLAB X recreate this file +# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at +# least once so the file gets created and the project can be built. Finally, you can also +# avoid using this file at all if you are only building from the command line with make. +# You can invoke make with the values of the macros: +# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ... +# +PATH_TO_IDE_BIN=/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/ +# Adding MPLAB X bin directory to path. +PATH:=/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/:$(PATH) +# Path to java used to run MPLAB X when this makefile was created +MP_JAVA_PATH="/opt/microchip/mplabx/v3.20/sys/java/jre1.8.0_65/bin/" +OS_CURRENT="$(shell uname -s)" +MP_CC="/opt/microchip/xc8/v1.35/bin/xc8" +# MP_CPPC is not defined +# MP_BC is not defined +MP_AS="/opt/microchip/xc8/v1.35/bin/xc8" +# MP_LD is not defined +# MP_AR is not defined +DEP_GEN=${MP_JAVA_PATH}java -jar "/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/extractobjectdependencies.jar" +MP_CC_DIR="/opt/microchip/xc8/v1.35/bin" +# MP_CPPC_DIR is not defined +# MP_BC_DIR is not defined +MP_AS_DIR="/opt/microchip/xc8/v1.35/bin" +# MP_LD_DIR is not defined +# MP_AR_DIR is not defined +# MP_BC_DIR is not defined diff --git a/nbproject/Package-default.bash b/nbproject/Package-default.bash new file mode 100644 index 0000000..c79af5d --- /dev/null +++ b/nbproject/Package-default.bash @@ -0,0 +1,73 @@ +#!/bin/bash -x + +# +# Generated - do not edit! +# + +# Macros +TOP=`pwd` +CND_CONF=default +CND_DISTDIR=dist +TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging +TMPDIRNAME=tmp-packaging +OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} +OUTPUT_BASENAME=IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} +PACKAGE_TOP_DIR=ir-receptor.x/ + +# Functions +function checkReturnCode +{ + rc=$? + if [ $rc != 0 ] + then + exit $rc + fi +} +function makeDirectory +# $1 directory path +# $2 permission (optional) +{ + mkdir -p "$1" + checkReturnCode + if [ "$2" != "" ] + then + chmod $2 "$1" + checkReturnCode + fi +} +function copyFileToTmpDir +# $1 from-file path +# $2 to-file path +# $3 permission +{ + cp "$1" "$2" + checkReturnCode + if [ "$3" != "" ] + then + chmod $3 "$2" + checkReturnCode + fi +} + +# Setup +cd "${TOP}" +mkdir -p ${CND_DISTDIR}/${CND_CONF}/package +rm -rf ${TMPDIR} +mkdir -p ${TMPDIR} + +# Copy files and create directories and links +cd "${TOP}" +makeDirectory ${TMPDIR}/ir-receptor.x/bin +copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755 + + +# Generate tar file +cd "${TOP}" +rm -f ${CND_DISTDIR}/${CND_CONF}/package/ir-receptor.x.tar +cd ${TMPDIR} +tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/ir-receptor.x.tar * +checkReturnCode + +# Cleanup +cd "${TOP}" +rm -rf ${TMPDIR} diff --git a/nbproject/configurations.xml b/nbproject/configurations.xml new file mode 100644 index 0000000..88ed7d1 --- /dev/null +++ b/nbproject/configurations.xml @@ -0,0 +1,59 @@ + + + + + + + + + + + Makefile + + + Makefile + + + + localhost + PIC16F87 + + + Simulator + XC8 + 1.35 + 2 + + + + + + + + + + false + false + + + + + false + + false + + false + false + false + + + + diff --git a/nbproject/private/configurations.xml b/nbproject/private/configurations.xml new file mode 100644 index 0000000..868d6ef --- /dev/null +++ b/nbproject/private/configurations.xml @@ -0,0 +1,25 @@ + + + Makefile + 0 + + + + /opt/microchip/xc8/v1.35/bin + + place holder 1 + place holder 2 + + + + + true + 0 + 0 + 0 + + + + + + diff --git a/nbproject/project.xml b/nbproject/project.xml new file mode 100644 index 0000000..d0ef7a3 --- /dev/null +++ b/nbproject/project.xml @@ -0,0 +1,17 @@ + + + com.microchip.mplab.nbide.embedded.makeproject + + + IR-Receptor + 0d6fc8fa-4cc4-4517-808d-35cbc80b987c + 0 + + + + + + UTF-8 + + +