commit 0ea1da413d9fe8132b5c8babd89b35b543c69621 Author: Mickaël TANSORIER Date: Fri Feb 26 18:08:55 2016 +0100 Initial commit Create project IR Tansmitor diff --git a/IR-Receptor-main.c b/IR-Receptor-main.c new file mode 100644 index 0000000..ab7cacd --- /dev/null +++ b/IR-Receptor-main.c @@ -0,0 +1,207 @@ +/* + * File: IR-Receptor-main.c + * Author: Mickaël Tansorier + * + * Created on 2 mars 2015, 18:09 + * + * License CC-BY-NC-SA + * https://creativecommons.org/licenses/by-nc-sa/3.0/fr/ + * + */ + +/* CONFIGUTATION */ +#pragma config CP = OFF // Flash Program Memory Code Protection bit (Code protection off) +#pragma config CCPMX = RB3 // CCP1 Pin Selection bit +#pragma config DEBUG = OFF // In-Circuit Debugger Mode bit +#pragma config WRT = OFF // Flash Program Memory Write Enable bits +#pragma config CPD = OFF // Data EE Memory Code Protection bit (Data memory code protection off) +#pragma config LVP = OFF // Low-Voltage Programming Enable bit (RB4/PGM pin has PGM function, low-voltage programming enabled) +#pragma config BOREN = ON // Brown-out Detect Enable bit (BOD enabled) +#pragma config MCLRE = OFF // RA5/MCLR/VPP Pin Function Select bit (RA5/MCLR/VPP pin function is MCLR) +#pragma config PWRTE = OFF // Power-up Timer Enable bit (PWRT disabled) +#pragma config WDTE = OFF // Watchdog Timer Enable bit (WDT disabled) +#pragma config FOSC = INTOSCIO + +#define _XTAL_FREQ 8000000 //set your internal(or)external oscillator speed + +#include +#include +#include + +/* PARAM */ +#pragma config CCPMX = RB3 // set PWM pin on RB3 (RB0 by default)) + +/* ALIAS */ +#define BUTTON2 PORTBbits.RB4 +#define BUTTON1 PORTBbits.RB5 + +/* FONCTION */ +void init_oscillator (void); +void init_PWM_Frequency (void); +void init_PWM_duty (void); +void timer2_start (void); +void start_PWM (void); +void stop_PWM (void); + +/* + * MAIN + */ +main(void) { + + init_oscillator(); + + /* DEFINE PORTS */ + TRISBbits.TRISB3 = 0; + TRISBbits.TRISB4 = 1; // button 2 - input + TRISBbits.TRISB5 = 1; // button 1 - input + + /* init port */ + PORTBbits.RB3 = 0; + + unsigned signal_precedent_1 = 0; + unsigned signal_precedent_2 = 0; + + /* INIT PWM */ + init_PWM_Frequency(); + init_PWM_duty(); + timer2_start(); + + /* ACTIVE INTERRUPT */ + INTCONbits.GIE = 1; + + + while(1) + { + + /* code: 01010101 */ + if(BUTTON1==1){ + __delay_ms(10); + if(BUTTON1==1 && signal_precedent_1==0){ + /* start bit */ + start_PWM(); + __delay_ms(10); + __delay_ms(1); + /* code */ + + stop_PWM(); + __delay_ms(1); + start_PWM(); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + start_PWM(); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + start_PWM(); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + start_PWM(); + __delay_ms(1); + + /* stop bit */ + stop_PWM(); + __delay_ms(1); + + signal_precedent_1=1; + } + else{stop_PWM();} + } + else{stop_PWM(); signal_precedent_1=0; __delay_ms(10);} + + + /* code: 00011000 */ + if(BUTTON2==1){ + __delay_ms(10); + if(BUTTON2==1 && signal_precedent_2==0){ + /* start bit */ + start_PWM(); + + /* code */ + __delay_ms(10); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + start_PWM(); + __delay_ms(1); + start_PWM(); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + stop_PWM(); + __delay_ms(1); + + /* stop bit */ + stop_PWM(); + + signal_precedent_2=1; + } + else{stop_PWM();} + } + else{stop_PWM(); signal_precedent_2=0; __delay_ms(10);} + + } + +} + +void init_oscillator(void){ + OSCCONbits.IRCF = 0b111; //8MHz + OSCCONbits.SCS = 0b00; //Oscillator mode defined by FOSC + OSCCONbits.IOFS = 1; //Frequency is stable +} + +void init_PWM_Frequency(void){ + // for 38kHz + // PR2 = ( PWM Period / ( TOsc x 4 x TMR2 Prescaler ) ) - 1 + // PR2 = 8 000 000 / (38 000 * 4 * 1) - 1 + // PR2 = 52.6 - 1 = 51.6 = 52 + // define predivisor T2CKPS1 and T2CKPS0 to 1 + T2CONbits.T2CKPS0 = 0; + T2CONbits.T2CKPS1 = 0; + // défine postscaler to 1 + T2CONbits.TOUTPS0 = 0; + T2CONbits.TOUTPS1 = 0; + T2CONbits.TOUTPS2 = 0; + T2CONbits.TOUTPS3 = 0; + // define PR2 + PR2 = 52; // <=> 0x34 +} + +void init_PWM_duty(void){ + // for duty cycle 50% + // duty cycle with CCPR1L register and to the CCP1CON<5:4> bits + // CCPR1L:CCP1CON<5:4> + // PWM Duty Cycle = (CCPR1L:CCP1CON<5:4>) ? TOSC ? (TMR2 Prescale Value) + // for 50% duty cycle, frequency 38kHz + // PWM Duty Cycle = 50/100*1/38000 = 0.0000132 + // TOSC = 1/8MHz = 0.000000125 + // CCPR1L:CCP1CON<5:4> = PWM Duty Cycle / TOSC / TMR2 Prescale Value + // CCPR1L:CCP1CON<5:4> = 0.0000132 / 0.000000125 /1 = 105.6 + // 106 = 0b01101010 + // CCPR1L = 0b11010 and CCP1CON<5:4> = 0b10 + CCP1CONbits.CCP1Y = 0; //CCP1CON<4> + CCP1CONbits.CCP1X = 1; //CCP1CON<5> + CCPR1L = 0b11010; +} + +void timer2_start(void){ + T2CONbits.TMR2ON = 1; // Timer2 On bit + PIE1bits.TMR2IE = 1; // TMR2 to PR2 Match Interrupt Enable bit + PIR1bits.TMR2IF = 0; // TMR2 to PR2 Interrupt Flag bit +} + +void start_PWM(void){ + CCP1CONbits.CCP1M = 0b1111; //11xx = PWM mode +} + +void stop_PWM(void){ + CCP1CONbits.CCP1M = 0b0000; +} + diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..fca8e2c --- /dev/null +++ b/Makefile @@ -0,0 +1,113 @@ +# +# There exist several targets which are by default empty and which can be +# used for execution of your targets. These targets are usually executed +# before and after some main targets. They are: +# +# .build-pre: called before 'build' target +# .build-post: called after 'build' target +# .clean-pre: called before 'clean' target +# .clean-post: called after 'clean' target +# .clobber-pre: called before 'clobber' target +# .clobber-post: called after 'clobber' target +# .all-pre: called before 'all' target +# .all-post: called after 'all' target +# .help-pre: called before 'help' target +# .help-post: called after 'help' target +# +# Targets beginning with '.' are not intended to be called on their own. +# +# Main targets can be executed directly, and they are: +# +# build build a specific configuration +# clean remove built files from a configuration +# clobber remove all built files +# all build all configurations +# help print help mesage +# +# Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and +# .help-impl are implemented in nbproject/makefile-impl.mk. +# +# Available make variables: +# +# CND_BASEDIR base directory for relative paths +# CND_DISTDIR default top distribution directory (build artifacts) +# CND_BUILDDIR default top build directory (object files, ...) +# CONF name of current configuration +# CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration) +# CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration) +# CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration) +# CND_PACKAGE_DIR_${CONF} directory of package (current configuration) +# CND_PACKAGE_NAME_${CONF} name of package (current configuration) +# CND_PACKAGE_PATH_${CONF} path to package (current configuration) +# +# NOCDDL + + +# Environment +MKDIR=mkdir +CP=cp +CCADMIN=CCadmin +RANLIB=ranlib + + +# build +build: .build-post + +.build-pre: +# Add your pre 'build' code here... + +.build-post: .build-impl +# Add your post 'build' code here... + + +# clean +clean: .clean-post + +.clean-pre: +# Add your pre 'clean' code here... +# WARNING: the IDE does not call this target since it takes a long time to +# simply run make. Instead, the IDE removes the configuration directories +# under build and dist directly without calling make. +# This target is left here so people can do a clean when running a clean +# outside the IDE. + +.clean-post: .clean-impl +# Add your post 'clean' code here... + + +# clobber +clobber: .clobber-post + +.clobber-pre: +# Add your pre 'clobber' code here... + +.clobber-post: .clobber-impl +# Add your post 'clobber' code here... + + +# all +all: .all-post + +.all-pre: +# Add your pre 'all' code here... + +.all-post: .all-impl +# Add your post 'all' code here... + + +# help +help: .help-post + +.help-pre: +# Add your pre 'help' code here... + +.help-post: .help-impl +# Add your post 'help' code here... + + + +# include project implementation makefile +include nbproject/Makefile-impl.mk + +# include project make variables +include nbproject/Makefile-variables.mk diff --git a/nbproject/Makefile-default.mk b/nbproject/Makefile-default.mk new file mode 100644 index 0000000..c51f996 --- /dev/null +++ b/nbproject/Makefile-default.mk @@ -0,0 +1,255 @@ +# +# Generated Makefile - do not edit! +# +# Edit the Makefile in the project folder instead (../Makefile). Each target +# has a -pre and a -post target defined where you can add customized code. +# +# This makefile implements configuration specific macros and targets. + + +# Include project Makefile +ifeq "${IGNORE_LOCAL}" "TRUE" +# do not include local makefile. User is passing all local related variables already +else +include Makefile +# Include makefile containing local settings +ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk" +include nbproject/Makefile-local-default.mk +endif +endif + +# Environment +MKDIR=gnumkdir -p +RM=rm -f +MV=mv +CP=cp + +# Macros +CND_CONF=default +ifeq ($(TYPE_IMAGE), DEBUG_RUN) +IMAGE_TYPE=debug +OUTPUT_SUFFIX=elf +DEBUGGABLE_SUFFIX=elf +FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} +else +IMAGE_TYPE=production +OUTPUT_SUFFIX=hex +DEBUGGABLE_SUFFIX=elf +FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} +endif + +# Object Directory +OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE} + +# Distribution Directory +DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE} + +# Source Files Quoted if spaced +SOURCEFILES_QUOTED_IF_SPACED=pwm.c main_IR_transmitor.c save_02.c save_03.c ../IR_Receptor.X/save_01.c save_04.c save_05.c save_06.c + +# Object Files Quoted if spaced +OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/pwm.p1 ${OBJECTDIR}/main_IR_transmitor.p1 ${OBJECTDIR}/save_02.p1 ${OBJECTDIR}/save_03.p1 ${OBJECTDIR}/_ext/1872918541/save_01.p1 ${OBJECTDIR}/save_04.p1 ${OBJECTDIR}/save_05.p1 ${OBJECTDIR}/save_06.p1 +POSSIBLE_DEPFILES=${OBJECTDIR}/pwm.p1.d ${OBJECTDIR}/main_IR_transmitor.p1.d ${OBJECTDIR}/save_02.p1.d ${OBJECTDIR}/save_03.p1.d ${OBJECTDIR}/_ext/1872918541/save_01.p1.d ${OBJECTDIR}/save_04.p1.d ${OBJECTDIR}/save_05.p1.d ${OBJECTDIR}/save_06.p1.d + +# Object Files +OBJECTFILES=${OBJECTDIR}/pwm.p1 ${OBJECTDIR}/main_IR_transmitor.p1 ${OBJECTDIR}/save_02.p1 ${OBJECTDIR}/save_03.p1 ${OBJECTDIR}/_ext/1872918541/save_01.p1 ${OBJECTDIR}/save_04.p1 ${OBJECTDIR}/save_05.p1 ${OBJECTDIR}/save_06.p1 + +# Source Files +SOURCEFILES=pwm.c main_IR_transmitor.c save_02.c save_03.c ../IR_Receptor.X/save_01.c save_04.c save_05.c save_06.c + + +CFLAGS= +ASFLAGS= +LDLIBSOPTIONS= + +############# Tool locations ########################################## +# If you copy a project from one host to another, the path where the # +# compiler is installed may be different. # +# If you open this project with MPLAB X in the new host, this # +# makefile will be regenerated and the paths will be corrected. # +####################################################################### +# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build +FIXDEPS=fixDeps + +.build-conf: ${BUILD_SUBPROJECTS} +ifneq ($(INFORMATION_MESSAGE), ) + @echo $(INFORMATION_MESSAGE) +endif + ${MAKE} -f nbproject/Makefile-default.mk dist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} + +MP_PROCESSOR_OPTION=16F87 +# ------------------------------------------------------------------------------------ +# Rules for buildStep: compile +ifeq ($(TYPE_IMAGE), DEBUG_RUN) +${OBJECTDIR}/pwm.p1: pwm.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/pwm.p1.d + @${RM} ${OBJECTDIR}/pwm.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/pwm.p1 pwm.c + @-${MV} ${OBJECTDIR}/pwm.d ${OBJECTDIR}/pwm.p1.d + @${FIXDEPS} ${OBJECTDIR}/pwm.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/main_IR_transmitor.p1: main_IR_transmitor.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/main_IR_transmitor.p1.d + @${RM} ${OBJECTDIR}/main_IR_transmitor.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/main_IR_transmitor.p1 main_IR_transmitor.c + @-${MV} ${OBJECTDIR}/main_IR_transmitor.d ${OBJECTDIR}/main_IR_transmitor.p1.d + @${FIXDEPS} ${OBJECTDIR}/main_IR_transmitor.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_02.p1: save_02.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_02.p1.d + @${RM} ${OBJECTDIR}/save_02.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_02.p1 save_02.c + @-${MV} ${OBJECTDIR}/save_02.d ${OBJECTDIR}/save_02.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_02.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_03.p1: save_03.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_03.p1.d + @${RM} ${OBJECTDIR}/save_03.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_03.p1 save_03.c + @-${MV} ${OBJECTDIR}/save_03.d ${OBJECTDIR}/save_03.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_03.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/_ext/1872918541/save_01.p1: ../IR_Receptor.X/save_01.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}/_ext/1872918541" + @${RM} ${OBJECTDIR}/_ext/1872918541/save_01.p1.d + @${RM} ${OBJECTDIR}/_ext/1872918541/save_01.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/_ext/1872918541/save_01.p1 ../IR_Receptor.X/save_01.c + @-${MV} ${OBJECTDIR}/_ext/1872918541/save_01.d ${OBJECTDIR}/_ext/1872918541/save_01.p1.d + @${FIXDEPS} ${OBJECTDIR}/_ext/1872918541/save_01.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_04.p1: save_04.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_04.p1.d + @${RM} ${OBJECTDIR}/save_04.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_04.p1 save_04.c + @-${MV} ${OBJECTDIR}/save_04.d ${OBJECTDIR}/save_04.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_04.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_05.p1: save_05.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_05.p1.d + @${RM} ${OBJECTDIR}/save_05.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_05.p1 save_05.c + @-${MV} ${OBJECTDIR}/save_05.d ${OBJECTDIR}/save_05.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_05.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_06.p1: save_06.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_06.p1.d + @${RM} ${OBJECTDIR}/save_06.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_06.p1 save_06.c + @-${MV} ${OBJECTDIR}/save_06.d ${OBJECTDIR}/save_06.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_06.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +else +${OBJECTDIR}/pwm.p1: pwm.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/pwm.p1.d + @${RM} ${OBJECTDIR}/pwm.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/pwm.p1 pwm.c + @-${MV} ${OBJECTDIR}/pwm.d ${OBJECTDIR}/pwm.p1.d + @${FIXDEPS} ${OBJECTDIR}/pwm.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/main_IR_transmitor.p1: main_IR_transmitor.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/main_IR_transmitor.p1.d + @${RM} ${OBJECTDIR}/main_IR_transmitor.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/main_IR_transmitor.p1 main_IR_transmitor.c + @-${MV} ${OBJECTDIR}/main_IR_transmitor.d ${OBJECTDIR}/main_IR_transmitor.p1.d + @${FIXDEPS} ${OBJECTDIR}/main_IR_transmitor.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_02.p1: save_02.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_02.p1.d + @${RM} ${OBJECTDIR}/save_02.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_02.p1 save_02.c + @-${MV} ${OBJECTDIR}/save_02.d ${OBJECTDIR}/save_02.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_02.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_03.p1: save_03.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_03.p1.d + @${RM} ${OBJECTDIR}/save_03.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_03.p1 save_03.c + @-${MV} ${OBJECTDIR}/save_03.d ${OBJECTDIR}/save_03.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_03.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/_ext/1872918541/save_01.p1: ../IR_Receptor.X/save_01.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}/_ext/1872918541" + @${RM} ${OBJECTDIR}/_ext/1872918541/save_01.p1.d + @${RM} ${OBJECTDIR}/_ext/1872918541/save_01.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/_ext/1872918541/save_01.p1 ../IR_Receptor.X/save_01.c + @-${MV} ${OBJECTDIR}/_ext/1872918541/save_01.d ${OBJECTDIR}/_ext/1872918541/save_01.p1.d + @${FIXDEPS} ${OBJECTDIR}/_ext/1872918541/save_01.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_04.p1: save_04.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_04.p1.d + @${RM} ${OBJECTDIR}/save_04.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_04.p1 save_04.c + @-${MV} ${OBJECTDIR}/save_04.d ${OBJECTDIR}/save_04.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_04.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_05.p1: save_05.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_05.p1.d + @${RM} ${OBJECTDIR}/save_05.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_05.p1 save_05.c + @-${MV} ${OBJECTDIR}/save_05.d ${OBJECTDIR}/save_05.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_05.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +${OBJECTDIR}/save_06.p1: save_06.c nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} "${OBJECTDIR}" + @${RM} ${OBJECTDIR}/save_06.p1.d + @${RM} ${OBJECTDIR}/save_06.p1 + ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -o${OBJECTDIR}/save_06.p1 save_06.c + @-${MV} ${OBJECTDIR}/save_06.d ${OBJECTDIR}/save_06.p1.d + @${FIXDEPS} ${OBJECTDIR}/save_06.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ + +endif + +# ------------------------------------------------------------------------------------ +# Rules for buildStep: assemble +ifeq ($(TYPE_IMAGE), DEBUG_RUN) +else +endif + +# ------------------------------------------------------------------------------------ +# Rules for buildStep: link +ifeq ($(TYPE_IMAGE), DEBUG_RUN) +dist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} + ${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G -mdist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.map -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -odist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} + @${RM} dist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.hex + +else +dist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk + @${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} + ${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G -mdist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.map --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=0 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" -odist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} + +endif + + +# Subprojects +.build-subprojects: + + +# Subprojects +.clean-subprojects: + +# Clean Targets +.clean-conf: ${CLEAN_SUBPROJECTS} + ${RM} -r build/default + ${RM} -r dist/default + +# Enable dependency checking +.dep.inc: .depcheck-impl + +DEPFILES=$(shell mplabwildcard ${POSSIBLE_DEPFILES}) +ifneq (${DEPFILES},) +include ${DEPFILES} +endif diff --git a/nbproject/Makefile-genesis.properties b/nbproject/Makefile-genesis.properties new file mode 100644 index 0000000..208391f --- /dev/null +++ b/nbproject/Makefile-genesis.properties @@ -0,0 +1,8 @@ +# +#Tue Aug 25 11:54:00 CEST 2015 +default.languagetoolchain.dir=C\:\\Program Files (x86)\\Microchip\\xc8\\v1.34\\bin +com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=14bfd24937c194037d3fb4871f06392b +default.languagetoolchain.version=1.34 +host.platform=windows +conf.ids=default +default.com-microchip-mplab-nbide-toolchainXC8-XC8LanguageToolchain.md5=8e4b1923d51ddb95d5dd2242a6e4ff4e diff --git a/nbproject/Makefile-impl.mk b/nbproject/Makefile-impl.mk new file mode 100644 index 0000000..c57f431 --- /dev/null +++ b/nbproject/Makefile-impl.mk @@ -0,0 +1,69 @@ +# +# Generated Makefile - do not edit! +# +# Edit the Makefile in the project folder instead (../Makefile). Each target +# has a pre- and a post- target defined where you can add customization code. +# +# This makefile implements macros and targets common to all configurations. +# +# NOCDDL + + +# Building and Cleaning subprojects are done by default, but can be controlled with the SUB +# macro. If SUB=no, subprojects will not be built or cleaned. The following macro +# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf +# and .clean-reqprojects-conf unless SUB has the value 'no' +SUB_no=NO +SUBPROJECTS=${SUB_${SUB}} +BUILD_SUBPROJECTS_=.build-subprojects +BUILD_SUBPROJECTS_NO= +BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}} +CLEAN_SUBPROJECTS_=.clean-subprojects +CLEAN_SUBPROJECTS_NO= +CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}} + + +# Project Name +PROJECTNAME=IR_transmitor.X + +# Active Configuration +DEFAULTCONF=default +CONF=${DEFAULTCONF} + +# All Configurations +ALLCONFS=default + + +# build +.build-impl: .build-pre + ${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf + + +# clean +.clean-impl: .clean-pre + ${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf + +# clobber +.clobber-impl: .clobber-pre .depcheck-impl + ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean + + + +# all +.all-impl: .all-pre .depcheck-impl + ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build + + + +# dependency checking support +.depcheck-impl: +# @echo "# This code depends on make tool being used" >.dep.inc +# @if [ -n "${MAKE_VERSION}" ]; then \ +# echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \ +# echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \ +# echo "include \$${DEPFILES}" >>.dep.inc; \ +# echo "endif" >>.dep.inc; \ +# else \ +# echo ".KEEP_STATE:" >>.dep.inc; \ +# echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \ +# fi diff --git a/nbproject/Makefile-local-default.mk b/nbproject/Makefile-local-default.mk new file mode 100644 index 0000000..8c139b7 --- /dev/null +++ b/nbproject/Makefile-local-default.mk @@ -0,0 +1,37 @@ +# +# Generated Makefile - do not edit! +# +# +# This file contains information about the location of compilers and other tools. +# If you commmit this file into your revision control server, you will be able to +# to checkout the project and build it from the command line with make. However, +# if more than one person works on the same project, then this file might show +# conflicts since different users are bound to have compilers in different places. +# In that case you might choose to not commit this file and let MPLAB X recreate this file +# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at +# least once so the file gets created and the project can be built. Finally, you can also +# avoid using this file at all if you are only building from the command line with make. +# You can invoke make with the values of the macros: +# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ... +# +SHELL=cmd.exe +PATH_TO_IDE_BIN=C:/Program Files (x86)/Microchip/MPLABX/v3.00.02-beta/mplab_ide/mplab_ide/modules/../../bin/ +# Adding MPLAB X bin directory to path. +PATH:=C:/Program Files (x86)/Microchip/MPLABX/v3.00.02-beta/mplab_ide/mplab_ide/modules/../../bin/:$(PATH) +# Path to java used to run MPLAB X when this makefile was created +MP_JAVA_PATH="C:\Program Files (x86)\Microchip\MPLABX\v3.00.02-beta\sys\java\jre1.7.0_67/bin/" +OS_CURRENT="$(shell uname -s)" +MP_CC="C:\Program Files (x86)\Microchip\xc8\v1.34\bin\xc8.exe" +# MP_CPPC is not defined +# MP_BC is not defined +MP_AS="C:\Program Files (x86)\Microchip\xc8\v1.34\bin\xc8.exe" +# MP_LD is not defined +# MP_AR is not defined +DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files (x86)/Microchip/MPLABX/v3.00.02-beta/mplab_ide/mplab_ide/modules/../../bin/extractobjectdependencies.jar" +MP_CC_DIR="C:\Program Files (x86)\Microchip\xc8\v1.34\bin" +# MP_CPPC_DIR is not defined +# MP_BC_DIR is not defined +MP_AS_DIR="C:\Program Files (x86)\Microchip\xc8\v1.34\bin" +# MP_LD_DIR is not defined +# MP_AR_DIR is not defined +# MP_BC_DIR is not defined diff --git a/nbproject/Makefile-variables.mk b/nbproject/Makefile-variables.mk new file mode 100644 index 0000000..d988ec2 --- /dev/null +++ b/nbproject/Makefile-variables.mk @@ -0,0 +1,13 @@ +# +# Generated - do not edit! +# +# NOCDDL +# +CND_BASEDIR=`pwd` +# default configuration +CND_ARTIFACT_DIR_default=dist/default/production +CND_ARTIFACT_NAME_default=IR_transmitor.X.production.hex +CND_ARTIFACT_PATH_default=dist/default/production/IR_transmitor.X.production.hex +CND_PACKAGE_DIR_default=${CND_DISTDIR}/default/package +CND_PACKAGE_NAME_default=irtransmitor.x.tar +CND_PACKAGE_PATH_default=${CND_DISTDIR}/default/package/irtransmitor.x.tar diff --git a/nbproject/Package-default.bash b/nbproject/Package-default.bash new file mode 100644 index 0000000..e7a8c64 --- /dev/null +++ b/nbproject/Package-default.bash @@ -0,0 +1,73 @@ +#!/bin/bash -x + +# +# Generated - do not edit! +# + +# Macros +TOP=`pwd` +CND_CONF=default +CND_DISTDIR=dist +TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging +TMPDIRNAME=tmp-packaging +OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/IR_transmitor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} +OUTPUT_BASENAME=IR_transmitor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} +PACKAGE_TOP_DIR=irtransmitor.x/ + +# Functions +function checkReturnCode +{ + rc=$? + if [ $rc != 0 ] + then + exit $rc + fi +} +function makeDirectory +# $1 directory path +# $2 permission (optional) +{ + mkdir -p "$1" + checkReturnCode + if [ "$2" != "" ] + then + chmod $2 "$1" + checkReturnCode + fi +} +function copyFileToTmpDir +# $1 from-file path +# $2 to-file path +# $3 permission +{ + cp "$1" "$2" + checkReturnCode + if [ "$3" != "" ] + then + chmod $3 "$2" + checkReturnCode + fi +} + +# Setup +cd "${TOP}" +mkdir -p ${CND_DISTDIR}/${CND_CONF}/package +rm -rf ${TMPDIR} +mkdir -p ${TMPDIR} + +# Copy files and create directories and links +cd "${TOP}" +makeDirectory ${TMPDIR}/irtransmitor.x/bin +copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755 + + +# Generate tar file +cd "${TOP}" +rm -f ${CND_DISTDIR}/${CND_CONF}/package/irtransmitor.x.tar +cd ${TMPDIR} +tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/irtransmitor.x.tar * +checkReturnCode + +# Cleanup +cd "${TOP}" +rm -rf ${TMPDIR} diff --git a/nbproject/configurations.xml b/nbproject/configurations.xml new file mode 100644 index 0000000..a12bd71 --- /dev/null +++ b/nbproject/configurations.xml @@ -0,0 +1,366 @@ + + + + + + + + + pwm.c + main_IR_transmitor.c + save_02.c + save_03.c + ../IR_Receptor.X/save_01.c + save_04.c + save_05.c + save_06.c + + + Makefile + + + + . + ../IR_Receptor.X + + Makefile + + + + localhost + PIC16F87 + + + Simulator + XC8 + 1.34 + 3 + + + + + + + + + + false + false + + + + + false + + false + + false + false + false + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/nbproject/private/SuppressibleMessageMemo.properties b/nbproject/private/SuppressibleMessageMemo.properties new file mode 100644 index 0000000..4c1d389 --- /dev/null +++ b/nbproject/private/SuppressibleMessageMemo.properties @@ -0,0 +1,25 @@ +# +#Mon Dec 14 11:52:54 CET 2015 +mdbDebugger/MEMORY_VIEW_LAST_HW_BP_RESOURCE_WARN=false +pkobskde/CHECK_4_HIGH_VOLTAGE_VPP=false +pk3/DEVID_MISMATCH=false +mdbDebugger/NO_HW_BP_RESOURCES_WARN=false +mdbDebugger/NO_HW_COMBINER_RESOURCES_WARNING=false +icd3/CAL_WARNING=false +mdbDebugger/MEMORY_VIEW_NO_HW_BP_RESOURCES_WARN=false +pk3/CHECK_CLOCK=false +mdbDebugger/LAST_HW_BP_RESOURCE_WARN=false +pk3/CHECK_4_HIGH_VOLTAGE_VPP=false +icd3/DEVID_MISMATCH=false +realice/DEVID_MISMATCH=false +realice/CHECK_CLOCK=false +pkoblicdbgr/DEVID_MISMATCH=false +pkoblicdbgr/CHECK_CLOCK=false +pkobskde/DEVID_MISMATCH=false +icd3/CHECK_CLOCK=false +realice/CHECK_4_HIGH_VOLTAGE_VPP=false +pkoblicdbgr/CHECK_4_HIGH_VOLTAGE_VPP=false +pk3/CAL_WARNING=false +icd3/CHECK_4_HIGH_VOLTAGE_VPP=false +pkobskde/CHECK_CLOCK=false +realice/CAL_WARNING=false diff --git a/nbproject/private/configurations.xml b/nbproject/private/configurations.xml new file mode 100644 index 0000000..f8e3346 --- /dev/null +++ b/nbproject/private/configurations.xml @@ -0,0 +1,25 @@ + + + Makefile + 0 + + + + C:\Program Files (x86)\Microchip\xc8\v1.34\bin + + place holder 1 + place holder 2 + + + + + true + 0 + 0 + 0 + + + + + + diff --git a/nbproject/private/private.xml b/nbproject/private/private.xml new file mode 100644 index 0000000..be5489f --- /dev/null +++ b/nbproject/private/private.xml @@ -0,0 +1,9 @@ + + + + + + file:/C:/Users/micka/Documents/PIC/IR_transmitor.X/main_IR_transmitor.c + + + diff --git a/nbproject/project.xml b/nbproject/project.xml new file mode 100644 index 0000000..0296f28 --- /dev/null +++ b/nbproject/project.xml @@ -0,0 +1,17 @@ + + + com.microchip.mplab.nbide.embedded.makeproject + + + IR_transmitor + 963bc964-bdfe-4995-a59c-86d9da9ec038 + 0 + c + + + + ISO-8859-1 + + + +