Mickaël TANSORIER
9 years ago
commit
1537441bb1
@ -0,0 +1,152 @@
|
|||||||
|
/*
|
||||||
|
* File: main_IR_Receptor.c
|
||||||
|
* Author: micka
|
||||||
|
*
|
||||||
|
* Created on 9 mars 2015, 17:03
|
||||||
|
*
|
||||||
|
* License CC-BY-NC-SA
|
||||||
|
* https://creativecommons.org/licenses/by-nc-sa/3.0/fr/
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* CONFIGURATION */
|
||||||
|
#pragma config CP = OFF // Flash Program Memory Code Protection bit (Code protection off)
|
||||||
|
#pragma config CCPMX = RB3 // CCP1 Pin Selection bit
|
||||||
|
#pragma config DEBUG = OFF // In-Circuit Debugger Mode bit
|
||||||
|
#pragma config WRT = OFF // Flash Program Memory Write Enable bits
|
||||||
|
#pragma config CPD = OFF // Data EE Memory Code Protection bit (Data memory code protection off)
|
||||||
|
#pragma config LVP = OFF // Low-Voltage Programming Enable bit (RB4/PGM pin has PGM function, low-voltage programming enabled)
|
||||||
|
#pragma config BOREN = ON // Brown-out Detect Enable bit (BOD enabled)
|
||||||
|
#pragma config MCLRE = OFF // RA5/MCLR/VPP Pin Function Select bit (RA5/MCLR/VPP pin function is MCLR)
|
||||||
|
#pragma config PWRTE = OFF // Power-up Timer Enable bit (PWRT disabled)
|
||||||
|
#pragma config WDTE = OFF // Watchdog Timer Enable bit (WDT disabled)
|
||||||
|
#pragma config FOSC = INTOSCIO
|
||||||
|
|
||||||
|
#define _XTAL_FREQ 8000000 // set your internal(or)external oscillator speed
|
||||||
|
|
||||||
|
#include <htc.h>
|
||||||
|
#include <xc.h>
|
||||||
|
#include <pic16f87.h>
|
||||||
|
|
||||||
|
/* Alias */
|
||||||
|
#define RECEP PORTAbits.RA1
|
||||||
|
#define OUT1 PORTAbits.RA2
|
||||||
|
#define OUT2 PORTAbits.RA3
|
||||||
|
#define RED1 PORTBbits.RB2
|
||||||
|
#define GREEN1 PORTBbits.RB3
|
||||||
|
#define RED2 PORTBbits.RB5
|
||||||
|
#define GREEN2 PORTBbits.RB4
|
||||||
|
|
||||||
|
/* FONCTIONS */
|
||||||
|
void init_oscillator (void);
|
||||||
|
unsigned change_out (unsigned OUT);
|
||||||
|
void init_code (unsigned *code);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MAIN
|
||||||
|
*/
|
||||||
|
void main(void) {
|
||||||
|
|
||||||
|
init_oscillator();
|
||||||
|
|
||||||
|
TRISAbits.TRISA1 = 1; //input of IR recepter
|
||||||
|
TRISAbits.TRISA2 = 0; //output led
|
||||||
|
TRISAbits.TRISA3 = 0; //output led
|
||||||
|
|
||||||
|
TRISB = 0;
|
||||||
|
TRISAbits.TRISA4 = 0; //output led
|
||||||
|
|
||||||
|
unsigned signal_precedent = 1;
|
||||||
|
|
||||||
|
unsigned code[8];
|
||||||
|
|
||||||
|
/* set code to 0 */
|
||||||
|
init_code(code);
|
||||||
|
|
||||||
|
/* set outpu to 0 */
|
||||||
|
OUT1 = 0;
|
||||||
|
OUT2 = 0;
|
||||||
|
GREEN1 = 0;RED1 = 1;
|
||||||
|
GREEN2 = 0;RED2 = 1;
|
||||||
|
|
||||||
|
while(1)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* code: 01010101 -> reception: 10101010 */
|
||||||
|
if( code[0]==1 && code[1]==0 && code[2]==1 && code[3]==0 && code[4]==1 && code[5]==0 && code[6]==1 && code[7]==0 ){
|
||||||
|
OUT1 = change_out(OUT1);
|
||||||
|
if( OUT1==1 ){GREEN1=1;RED1=0;}else{GREEN1=0;RED1=1;}
|
||||||
|
init_code(code);
|
||||||
|
}
|
||||||
|
/* code: 00011000 -> reception: 11100111 */
|
||||||
|
else if( code[0]==1 && code[1]==1 && code[2]==1 && code[3]==0 && code[4]==0 && code[5]==1 && code[6]==1 && code[7]==1 ){
|
||||||
|
OUT2 = change_out(OUT2);
|
||||||
|
if( OUT2==1 ){ GREEN2=1;RED2=0; }else{ GREEN2=0;RED2=1; }
|
||||||
|
init_code(code);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
if( RECEP==0 ){
|
||||||
|
__delay_ms(10);
|
||||||
|
if( RECEP==0 && signal_precedent==1 ){
|
||||||
|
__delay_ms(1);
|
||||||
|
__delay_us(500); // delay to be at the midle
|
||||||
|
|
||||||
|
code[0] = RECEP;
|
||||||
|
__delay_ms(1);
|
||||||
|
code[1] = RECEP;
|
||||||
|
__delay_ms(1);
|
||||||
|
code[2] = RECEP;
|
||||||
|
__delay_ms(1);
|
||||||
|
code[3] = RECEP;
|
||||||
|
__delay_ms(1);
|
||||||
|
code[4] = RECEP;
|
||||||
|
__delay_ms(1);
|
||||||
|
code[5] = RECEP;
|
||||||
|
__delay_ms(1);
|
||||||
|
code[6] = RECEP;
|
||||||
|
__delay_ms(1);
|
||||||
|
code[7] = RECEP;
|
||||||
|
|
||||||
|
signal_precedent = 0;
|
||||||
|
|
||||||
|
PORTAbits.RA4 = change_out(PORTAbits.RA4);
|
||||||
|
}
|
||||||
|
else{}
|
||||||
|
}
|
||||||
|
else{ signal_precedent=1; }
|
||||||
|
|
||||||
|
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Init frenquency
|
||||||
|
*/
|
||||||
|
void init_oscillator(void){
|
||||||
|
OSCCONbits.IRCF = 0b111; //8MHz
|
||||||
|
OSCCONbits.SCS = 0b00; //Oscillator mode defined by FOSC
|
||||||
|
OSCCONbits.IOFS = 1; //Frequency is stable
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Change out signal
|
||||||
|
*/
|
||||||
|
unsigned change_out(unsigned OUT){
|
||||||
|
if( OUT==1 ) return 0;
|
||||||
|
else return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Set code to default: 00000000
|
||||||
|
*/
|
||||||
|
void init_code(unsigned *code){
|
||||||
|
code[0] = 0;
|
||||||
|
code[1] = 0;
|
||||||
|
code[2] = 0;
|
||||||
|
code[3] = 0;
|
||||||
|
code[4] = 0;
|
||||||
|
code[5] = 0;
|
||||||
|
code[6] = 0;
|
||||||
|
code[7] = 0;
|
||||||
|
}
|
||||||
@ -0,0 +1,113 @@
|
|||||||
|
#
|
||||||
|
# There exist several targets which are by default empty and which can be
|
||||||
|
# used for execution of your targets. These targets are usually executed
|
||||||
|
# before and after some main targets. They are:
|
||||||
|
#
|
||||||
|
# .build-pre: called before 'build' target
|
||||||
|
# .build-post: called after 'build' target
|
||||||
|
# .clean-pre: called before 'clean' target
|
||||||
|
# .clean-post: called after 'clean' target
|
||||||
|
# .clobber-pre: called before 'clobber' target
|
||||||
|
# .clobber-post: called after 'clobber' target
|
||||||
|
# .all-pre: called before 'all' target
|
||||||
|
# .all-post: called after 'all' target
|
||||||
|
# .help-pre: called before 'help' target
|
||||||
|
# .help-post: called after 'help' target
|
||||||
|
#
|
||||||
|
# Targets beginning with '.' are not intended to be called on their own.
|
||||||
|
#
|
||||||
|
# Main targets can be executed directly, and they are:
|
||||||
|
#
|
||||||
|
# build build a specific configuration
|
||||||
|
# clean remove built files from a configuration
|
||||||
|
# clobber remove all built files
|
||||||
|
# all build all configurations
|
||||||
|
# help print help mesage
|
||||||
|
#
|
||||||
|
# Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
|
||||||
|
# .help-impl are implemented in nbproject/makefile-impl.mk.
|
||||||
|
#
|
||||||
|
# Available make variables:
|
||||||
|
#
|
||||||
|
# CND_BASEDIR base directory for relative paths
|
||||||
|
# CND_DISTDIR default top distribution directory (build artifacts)
|
||||||
|
# CND_BUILDDIR default top build directory (object files, ...)
|
||||||
|
# CONF name of current configuration
|
||||||
|
# CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration)
|
||||||
|
# CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration)
|
||||||
|
# CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration)
|
||||||
|
# CND_PACKAGE_DIR_${CONF} directory of package (current configuration)
|
||||||
|
# CND_PACKAGE_NAME_${CONF} name of package (current configuration)
|
||||||
|
# CND_PACKAGE_PATH_${CONF} path to package (current configuration)
|
||||||
|
#
|
||||||
|
# NOCDDL
|
||||||
|
|
||||||
|
|
||||||
|
# Environment
|
||||||
|
MKDIR=mkdir
|
||||||
|
CP=cp
|
||||||
|
CCADMIN=CCadmin
|
||||||
|
RANLIB=ranlib
|
||||||
|
|
||||||
|
|
||||||
|
# build
|
||||||
|
build: .build-post
|
||||||
|
|
||||||
|
.build-pre:
|
||||||
|
# Add your pre 'build' code here...
|
||||||
|
|
||||||
|
.build-post: .build-impl
|
||||||
|
# Add your post 'build' code here...
|
||||||
|
|
||||||
|
|
||||||
|
# clean
|
||||||
|
clean: .clean-post
|
||||||
|
|
||||||
|
.clean-pre:
|
||||||
|
# Add your pre 'clean' code here...
|
||||||
|
# WARNING: the IDE does not call this target since it takes a long time to
|
||||||
|
# simply run make. Instead, the IDE removes the configuration directories
|
||||||
|
# under build and dist directly without calling make.
|
||||||
|
# This target is left here so people can do a clean when running a clean
|
||||||
|
# outside the IDE.
|
||||||
|
|
||||||
|
.clean-post: .clean-impl
|
||||||
|
# Add your post 'clean' code here...
|
||||||
|
|
||||||
|
|
||||||
|
# clobber
|
||||||
|
clobber: .clobber-post
|
||||||
|
|
||||||
|
.clobber-pre:
|
||||||
|
# Add your pre 'clobber' code here...
|
||||||
|
|
||||||
|
.clobber-post: .clobber-impl
|
||||||
|
# Add your post 'clobber' code here...
|
||||||
|
|
||||||
|
|
||||||
|
# all
|
||||||
|
all: .all-post
|
||||||
|
|
||||||
|
.all-pre:
|
||||||
|
# Add your pre 'all' code here...
|
||||||
|
|
||||||
|
.all-post: .all-impl
|
||||||
|
# Add your post 'all' code here...
|
||||||
|
|
||||||
|
|
||||||
|
# help
|
||||||
|
help: .help-post
|
||||||
|
|
||||||
|
.help-pre:
|
||||||
|
# Add your pre 'help' code here...
|
||||||
|
|
||||||
|
.help-post: .help-impl
|
||||||
|
# Add your post 'help' code here...
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# include project implementation makefile
|
||||||
|
include nbproject/Makefile-impl.mk
|
||||||
|
|
||||||
|
# include project make variables
|
||||||
|
include nbproject/Makefile-variables.mk
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
|
||||||
|
This is an MPLAB project to PIC16F87. You should use MPLAB to compile it.
|
||||||
|
|
||||||
|
License CC-BY-NC-SA https://creativecommons.org/licenses/by-nc-sa/3.0/fr/
|
||||||
|
|
||||||
@ -0,0 +1,127 @@
|
|||||||
|
#
|
||||||
|
# Generated Makefile - do not edit!
|
||||||
|
#
|
||||||
|
# Edit the Makefile in the project folder instead (../Makefile). Each target
|
||||||
|
# has a -pre and a -post target defined where you can add customized code.
|
||||||
|
#
|
||||||
|
# This makefile implements configuration specific macros and targets.
|
||||||
|
|
||||||
|
|
||||||
|
# Include project Makefile
|
||||||
|
ifeq "${IGNORE_LOCAL}" "TRUE"
|
||||||
|
# do not include local makefile. User is passing all local related variables already
|
||||||
|
else
|
||||||
|
include Makefile
|
||||||
|
# Include makefile containing local settings
|
||||||
|
ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk"
|
||||||
|
include nbproject/Makefile-local-default.mk
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
|
# Environment
|
||||||
|
MKDIR=mkdir -p
|
||||||
|
RM=rm -f
|
||||||
|
MV=mv
|
||||||
|
CP=cp
|
||||||
|
|
||||||
|
# Macros
|
||||||
|
CND_CONF=default
|
||||||
|
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
|
||||||
|
IMAGE_TYPE=debug
|
||||||
|
OUTPUT_SUFFIX=elf
|
||||||
|
DEBUGGABLE_SUFFIX=elf
|
||||||
|
FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
|
||||||
|
else
|
||||||
|
IMAGE_TYPE=production
|
||||||
|
OUTPUT_SUFFIX=hex
|
||||||
|
DEBUGGABLE_SUFFIX=elf
|
||||||
|
FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
|
||||||
|
endif
|
||||||
|
|
||||||
|
# Object Directory
|
||||||
|
OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE}
|
||||||
|
|
||||||
|
# Distribution Directory
|
||||||
|
DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE}
|
||||||
|
|
||||||
|
# Source Files Quoted if spaced
|
||||||
|
SOURCEFILES_QUOTED_IF_SPACED=
|
||||||
|
|
||||||
|
# Object Files Quoted if spaced
|
||||||
|
OBJECTFILES_QUOTED_IF_SPACED=
|
||||||
|
POSSIBLE_DEPFILES=
|
||||||
|
|
||||||
|
# Object Files
|
||||||
|
OBJECTFILES=
|
||||||
|
|
||||||
|
# Source Files
|
||||||
|
SOURCEFILES=
|
||||||
|
|
||||||
|
|
||||||
|
CFLAGS=
|
||||||
|
ASFLAGS=
|
||||||
|
LDLIBSOPTIONS=
|
||||||
|
|
||||||
|
############# Tool locations ##########################################
|
||||||
|
# If you copy a project from one host to another, the path where the #
|
||||||
|
# compiler is installed may be different. #
|
||||||
|
# If you open this project with MPLAB X in the new host, this #
|
||||||
|
# makefile will be regenerated and the paths will be corrected. #
|
||||||
|
#######################################################################
|
||||||
|
# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build
|
||||||
|
FIXDEPS=fixDeps
|
||||||
|
|
||||||
|
.build-conf: ${BUILD_SUBPROJECTS}
|
||||||
|
ifneq ($(INFORMATION_MESSAGE), )
|
||||||
|
@echo $(INFORMATION_MESSAGE)
|
||||||
|
endif
|
||||||
|
${MAKE} -f nbproject/Makefile-default.mk dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
|
||||||
|
|
||||||
|
MP_PROCESSOR_OPTION=16F87
|
||||||
|
# ------------------------------------------------------------------------------------
|
||||||
|
# Rules for buildStep: compile
|
||||||
|
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
|
||||||
|
else
|
||||||
|
endif
|
||||||
|
|
||||||
|
# ------------------------------------------------------------------------------------
|
||||||
|
# Rules for buildStep: assemble
|
||||||
|
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
|
||||||
|
else
|
||||||
|
endif
|
||||||
|
|
||||||
|
# ------------------------------------------------------------------------------------
|
||||||
|
# Rules for buildStep: link
|
||||||
|
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
|
||||||
|
dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk
|
||||||
|
@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE}
|
||||||
|
${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G -mdist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.map -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=-3 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,-osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" --memorysummary dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml -odist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED}
|
||||||
|
@${RM} dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.hex
|
||||||
|
|
||||||
|
else
|
||||||
|
dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk
|
||||||
|
@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE}
|
||||||
|
${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G -mdist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.map --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=-3 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,-osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" --memorysummary dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml -odist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED}
|
||||||
|
|
||||||
|
endif
|
||||||
|
|
||||||
|
|
||||||
|
# Subprojects
|
||||||
|
.build-subprojects:
|
||||||
|
|
||||||
|
|
||||||
|
# Subprojects
|
||||||
|
.clean-subprojects:
|
||||||
|
|
||||||
|
# Clean Targets
|
||||||
|
.clean-conf: ${CLEAN_SUBPROJECTS}
|
||||||
|
${RM} -r build/default
|
||||||
|
${RM} -r dist/default
|
||||||
|
|
||||||
|
# Enable dependency checking
|
||||||
|
.dep.inc: .depcheck-impl
|
||||||
|
|
||||||
|
DEPFILES=$(shell "${PATH_TO_IDE_BIN}"mplabwildcard ${POSSIBLE_DEPFILES})
|
||||||
|
ifneq (${DEPFILES},)
|
||||||
|
include ${DEPFILES}
|
||||||
|
endif
|
||||||
@ -0,0 +1,69 @@
|
|||||||
|
#
|
||||||
|
# Generated Makefile - do not edit!
|
||||||
|
#
|
||||||
|
# Edit the Makefile in the project folder instead (../Makefile). Each target
|
||||||
|
# has a pre- and a post- target defined where you can add customization code.
|
||||||
|
#
|
||||||
|
# This makefile implements macros and targets common to all configurations.
|
||||||
|
#
|
||||||
|
# NOCDDL
|
||||||
|
|
||||||
|
|
||||||
|
# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
|
||||||
|
# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
|
||||||
|
# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
|
||||||
|
# and .clean-reqprojects-conf unless SUB has the value 'no'
|
||||||
|
SUB_no=NO
|
||||||
|
SUBPROJECTS=${SUB_${SUB}}
|
||||||
|
BUILD_SUBPROJECTS_=.build-subprojects
|
||||||
|
BUILD_SUBPROJECTS_NO=
|
||||||
|
BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
|
||||||
|
CLEAN_SUBPROJECTS_=.clean-subprojects
|
||||||
|
CLEAN_SUBPROJECTS_NO=
|
||||||
|
CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
|
||||||
|
|
||||||
|
|
||||||
|
# Project Name
|
||||||
|
PROJECTNAME=IR-Receptor.X
|
||||||
|
|
||||||
|
# Active Configuration
|
||||||
|
DEFAULTCONF=default
|
||||||
|
CONF=${DEFAULTCONF}
|
||||||
|
|
||||||
|
# All Configurations
|
||||||
|
ALLCONFS=default
|
||||||
|
|
||||||
|
|
||||||
|
# build
|
||||||
|
.build-impl: .build-pre
|
||||||
|
${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
|
||||||
|
|
||||||
|
|
||||||
|
# clean
|
||||||
|
.clean-impl: .clean-pre
|
||||||
|
${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
|
||||||
|
|
||||||
|
# clobber
|
||||||
|
.clobber-impl: .clobber-pre .depcheck-impl
|
||||||
|
${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# all
|
||||||
|
.all-impl: .all-pre .depcheck-impl
|
||||||
|
${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# dependency checking support
|
||||||
|
.depcheck-impl:
|
||||||
|
# @echo "# This code depends on make tool being used" >.dep.inc
|
||||||
|
# @if [ -n "${MAKE_VERSION}" ]; then \
|
||||||
|
# echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
|
||||||
|
# echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
|
||||||
|
# echo "include \$${DEPFILES}" >>.dep.inc; \
|
||||||
|
# echo "endif" >>.dep.inc; \
|
||||||
|
# else \
|
||||||
|
# echo ".KEEP_STATE:" >>.dep.inc; \
|
||||||
|
# echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
|
||||||
|
# fi
|
||||||
@ -0,0 +1,36 @@
|
|||||||
|
#
|
||||||
|
# Generated Makefile - do not edit!
|
||||||
|
#
|
||||||
|
#
|
||||||
|
# This file contains information about the location of compilers and other tools.
|
||||||
|
# If you commmit this file into your revision control server, you will be able to
|
||||||
|
# to checkout the project and build it from the command line with make. However,
|
||||||
|
# if more than one person works on the same project, then this file might show
|
||||||
|
# conflicts since different users are bound to have compilers in different places.
|
||||||
|
# In that case you might choose to not commit this file and let MPLAB X recreate this file
|
||||||
|
# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
|
||||||
|
# least once so the file gets created and the project can be built. Finally, you can also
|
||||||
|
# avoid using this file at all if you are only building from the command line with make.
|
||||||
|
# You can invoke make with the values of the macros:
|
||||||
|
# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...
|
||||||
|
#
|
||||||
|
PATH_TO_IDE_BIN=/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/
|
||||||
|
# Adding MPLAB X bin directory to path.
|
||||||
|
PATH:=/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/:$(PATH)
|
||||||
|
# Path to java used to run MPLAB X when this makefile was created
|
||||||
|
MP_JAVA_PATH="/opt/microchip/mplabx/v3.20/sys/java/jre1.8.0_65/bin/"
|
||||||
|
OS_CURRENT="$(shell uname -s)"
|
||||||
|
MP_CC="/opt/microchip/xc8/v1.35/bin/xc8"
|
||||||
|
# MP_CPPC is not defined
|
||||||
|
# MP_BC is not defined
|
||||||
|
MP_AS="/opt/microchip/xc8/v1.35/bin/xc8"
|
||||||
|
# MP_LD is not defined
|
||||||
|
# MP_AR is not defined
|
||||||
|
DEP_GEN=${MP_JAVA_PATH}java -jar "/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/extractobjectdependencies.jar"
|
||||||
|
MP_CC_DIR="/opt/microchip/xc8/v1.35/bin"
|
||||||
|
# MP_CPPC_DIR is not defined
|
||||||
|
# MP_BC_DIR is not defined
|
||||||
|
MP_AS_DIR="/opt/microchip/xc8/v1.35/bin"
|
||||||
|
# MP_LD_DIR is not defined
|
||||||
|
# MP_AR_DIR is not defined
|
||||||
|
# MP_BC_DIR is not defined
|
||||||
@ -0,0 +1,73 @@
|
|||||||
|
#!/bin/bash -x
|
||||||
|
|
||||||
|
#
|
||||||
|
# Generated - do not edit!
|
||||||
|
#
|
||||||
|
|
||||||
|
# Macros
|
||||||
|
TOP=`pwd`
|
||||||
|
CND_CONF=default
|
||||||
|
CND_DISTDIR=dist
|
||||||
|
TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging
|
||||||
|
TMPDIRNAME=tmp-packaging
|
||||||
|
OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
|
||||||
|
OUTPUT_BASENAME=IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
|
||||||
|
PACKAGE_TOP_DIR=ir-receptor.x/
|
||||||
|
|
||||||
|
# Functions
|
||||||
|
function checkReturnCode
|
||||||
|
{
|
||||||
|
rc=$?
|
||||||
|
if [ $rc != 0 ]
|
||||||
|
then
|
||||||
|
exit $rc
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
function makeDirectory
|
||||||
|
# $1 directory path
|
||||||
|
# $2 permission (optional)
|
||||||
|
{
|
||||||
|
mkdir -p "$1"
|
||||||
|
checkReturnCode
|
||||||
|
if [ "$2" != "" ]
|
||||||
|
then
|
||||||
|
chmod $2 "$1"
|
||||||
|
checkReturnCode
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
function copyFileToTmpDir
|
||||||
|
# $1 from-file path
|
||||||
|
# $2 to-file path
|
||||||
|
# $3 permission
|
||||||
|
{
|
||||||
|
cp "$1" "$2"
|
||||||
|
checkReturnCode
|
||||||
|
if [ "$3" != "" ]
|
||||||
|
then
|
||||||
|
chmod $3 "$2"
|
||||||
|
checkReturnCode
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
# Setup
|
||||||
|
cd "${TOP}"
|
||||||
|
mkdir -p ${CND_DISTDIR}/${CND_CONF}/package
|
||||||
|
rm -rf ${TMPDIR}
|
||||||
|
mkdir -p ${TMPDIR}
|
||||||
|
|
||||||
|
# Copy files and create directories and links
|
||||||
|
cd "${TOP}"
|
||||||
|
makeDirectory ${TMPDIR}/ir-receptor.x/bin
|
||||||
|
copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
|
||||||
|
|
||||||
|
|
||||||
|
# Generate tar file
|
||||||
|
cd "${TOP}"
|
||||||
|
rm -f ${CND_DISTDIR}/${CND_CONF}/package/ir-receptor.x.tar
|
||||||
|
cd ${TMPDIR}
|
||||||
|
tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/ir-receptor.x.tar *
|
||||||
|
checkReturnCode
|
||||||
|
|
||||||
|
# Cleanup
|
||||||
|
cd "${TOP}"
|
||||||
|
rm -rf ${TMPDIR}
|
||||||
@ -0,0 +1,59 @@
|
|||||||
|
<?xml version="1.0" encoding="UTF-8"?>
|
||||||
|
<configurationDescriptor version="62">
|
||||||
|
<logicalFolder name="root" displayName="root" projectFiles="true">
|
||||||
|
<logicalFolder name="HeaderFiles"
|
||||||
|
displayName="Header Files"
|
||||||
|
projectFiles="true">
|
||||||
|
</logicalFolder>
|
||||||
|
<logicalFolder name="LinkerScript"
|
||||||
|
displayName="Linker Files"
|
||||||
|
projectFiles="true">
|
||||||
|
</logicalFolder>
|
||||||
|
<logicalFolder name="SourceFiles"
|
||||||
|
displayName="Source Files"
|
||||||
|
projectFiles="true">
|
||||||
|
</logicalFolder>
|
||||||
|
<logicalFolder name="ExternalFiles"
|
||||||
|
displayName="Important Files"
|
||||||
|
projectFiles="false">
|
||||||
|
<itemPath>Makefile</itemPath>
|
||||||
|
</logicalFolder>
|
||||||
|
</logicalFolder>
|
||||||
|
<projectmakefile>Makefile</projectmakefile>
|
||||||
|
<confs>
|
||||||
|
<conf name="default" type="2">
|
||||||
|
<toolsSet>
|
||||||
|
<developmentServer>localhost</developmentServer>
|
||||||
|
<targetDevice>PIC16F87</targetDevice>
|
||||||
|
<targetHeader></targetHeader>
|
||||||
|
<targetPluginBoard></targetPluginBoard>
|
||||||
|
<platformTool>Simulator</platformTool>
|
||||||
|
<languageToolchain>XC8</languageToolchain>
|
||||||
|
<languageToolchainVersion>1.35</languageToolchainVersion>
|
||||||
|
<platform>2</platform>
|
||||||
|
</toolsSet>
|
||||||
|
<compileType>
|
||||||
|
<linkerTool>
|
||||||
|
<linkerLibItems>
|
||||||
|
</linkerLibItems>
|
||||||
|
</linkerTool>
|
||||||
|
<archiverTool>
|
||||||
|
</archiverTool>
|
||||||
|
<loading>
|
||||||
|
<useAlternateLoadableFile>false</useAlternateLoadableFile>
|
||||||
|
<parseOnProdLoad>false</parseOnProdLoad>
|
||||||
|
<alternateLoadableFile></alternateLoadableFile>
|
||||||
|
</loading>
|
||||||
|
</compileType>
|
||||||
|
<makeCustomizationType>
|
||||||
|
<makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled>
|
||||||
|
<makeCustomizationPreStep></makeCustomizationPreStep>
|
||||||
|
<makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled>
|
||||||
|
<makeCustomizationPostStep></makeCustomizationPostStep>
|
||||||
|
<makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID>
|
||||||
|
<makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines>
|
||||||
|
<makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile>
|
||||||
|
</makeCustomizationType>
|
||||||
|
</conf>
|
||||||
|
</confs>
|
||||||
|
</configurationDescriptor>
|
||||||
@ -0,0 +1,25 @@
|
|||||||
|
<?xml version="1.0" encoding="UTF-8"?>
|
||||||
|
<configurationDescriptor version="62">
|
||||||
|
<projectmakefile>Makefile</projectmakefile>
|
||||||
|
<defaultConf>0</defaultConf>
|
||||||
|
<confs>
|
||||||
|
<conf name="default" type="2">
|
||||||
|
<platformToolSN></platformToolSN>
|
||||||
|
<languageToolchainDir>/opt/microchip/xc8/v1.35/bin</languageToolchainDir>
|
||||||
|
<mdbdebugger version="1">
|
||||||
|
<placeholder1>place holder 1</placeholder1>
|
||||||
|
<placeholder2>place holder 2</placeholder2>
|
||||||
|
</mdbdebugger>
|
||||||
|
<runprofile version="6">
|
||||||
|
<args></args>
|
||||||
|
<rundir></rundir>
|
||||||
|
<buildfirst>true</buildfirst>
|
||||||
|
<console-type>0</console-type>
|
||||||
|
<terminal-type>0</terminal-type>
|
||||||
|
<remove-instrumentation>0</remove-instrumentation>
|
||||||
|
<environment>
|
||||||
|
</environment>
|
||||||
|
</runprofile>
|
||||||
|
</conf>
|
||||||
|
</confs>
|
||||||
|
</configurationDescriptor>
|
||||||
@ -0,0 +1,17 @@
|
|||||||
|
<?xml version="1.0" encoding="UTF-8"?>
|
||||||
|
<project xmlns="http://www.netbeans.org/ns/project/1">
|
||||||
|
<type>com.microchip.mplab.nbide.embedded.makeproject</type>
|
||||||
|
<configuration>
|
||||||
|
<data xmlns="http://www.netbeans.org/ns/make-project/1">
|
||||||
|
<name>IR-Receptor</name>
|
||||||
|
<creation-uuid>0d6fc8fa-4cc4-4517-808d-35cbc80b987c</creation-uuid>
|
||||||
|
<make-project-type>0</make-project-type>
|
||||||
|
<c-extensions/>
|
||||||
|
<cpp-extensions/>
|
||||||
|
<header-extensions/>
|
||||||
|
<asminc-extensions/>
|
||||||
|
<make-dep-projects/>
|
||||||
|
<sourceEncoding>UTF-8</sourceEncoding>
|
||||||
|
</data>
|
||||||
|
</configuration>
|
||||||
|
</project>
|
||||||
Loading…
Reference in new issue