micka
/
IR-Receptor
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial commit

Browse Source 
Creation project IR Receptor
main
Mickaël TANSORIER 9 years ago
commit 1537441bb1
10 changed files with 676 additions and 0 deletions
Show Stats Download Patch File Download Diff File

152
IR-Receptor-main.c
Unescape View File

@ -0,0 +1,152 @@
/*
* File: main_IR_Receptor.c
* Author: micka
*
* Created on 9 mars 2015, 17:03
*
* License CC-BY-NC-SA
* https://creativecommons.org/licenses/by-nc-sa/3.0/fr/
*
*/
/* CONFIGURATION */
#pragma config CP = OFF // Flash Program Memory Code Protection bit (Code protection off)
#pragma config CCPMX = RB3 // CCP1 Pin Selection bit
#pragma config DEBUG = OFF // In-Circuit Debugger Mode bit
#pragma config WRT = OFF // Flash Program Memory Write Enable bits
#pragma config CPD = OFF // Data EE Memory Code Protection bit (Data memory code protection off)
#pragma config LVP = OFF // Low-Voltage Programming Enable bit (RB4/PGM pin has PGM function, low-voltage programming enabled)
#pragma config BOREN = ON // Brown-out Detect Enable bit (BOD enabled)
#pragma config MCLRE = OFF // RA5/MCLR/VPP Pin Function Select bit (RA5/MCLR/VPP pin function is MCLR)
#pragma config PWRTE = OFF // Power-up Timer Enable bit (PWRT disabled)
#pragma config WDTE = OFF // Watchdog Timer Enable bit (WDT disabled)
#pragma config FOSC = INTOSCIO
#define _XTAL_FREQ 8000000 // set your internal(or)external oscillator speed
#include <htc.h>
#include <xc.h>
#include <pic16f87.h>
/* Alias */
#define RECEP PORTAbits.RA1
#define OUT1 PORTAbits.RA2
#define OUT2 PORTAbits.RA3
#define RED1 PORTBbits.RB2
#define GREEN1 PORTBbits.RB3
#define RED2 PORTBbits.RB5
#define GREEN2 PORTBbits.RB4
/* FONCTIONS */
void init_oscillator (void);
unsigned change_out (unsigned OUT);
void init_code (unsigned *code);
/*
* MAIN
*/
void main(void) {
init_oscillator();
TRISAbits.TRISA1 = 1; //input of IR recepter
TRISAbits.TRISA2 = 0; //output led
TRISAbits.TRISA3 = 0; //output led
TRISB = 0;
TRISAbits.TRISA4 = 0; //output led
unsigned signal_precedent = 1;
unsigned code[8];
/* set code to 0 */
init_code(code);
/* set outpu to 0 */
OUT1 = 0;
OUT2 = 0;
GREEN1 = 0;RED1 = 1;
GREEN2 = 0;RED2 = 1;
while(1)
{
/* code: 01010101 -> reception: 10101010 */
if( code[0]==1 && code[1]==0 && code[2]==1 && code[3]==0 && code[4]==1 && code[5]==0 && code[6]==1 && code[7]==0 ){
OUT1 = change_out(OUT1);
if( OUT1==1 ){GREEN1=1;RED1=0;}else{GREEN1=0;RED1=1;}
init_code(code);
}
/* code: 00011000 -> reception: 11100111 */
else if( code[0]==1 && code[1]==1 && code[2]==1 && code[3]==0 && code[4]==0 && code[5]==1 && code[6]==1 && code[7]==1 ){
OUT2 = change_out(OUT2);
if( OUT2==1 ){ GREEN2=1;RED2=0; }else{ GREEN2=0;RED2=1; }
init_code(code);
}
if( RECEP==0 ){
__delay_ms(10);
if( RECEP==0 && signal_precedent==1 ){
__delay_ms(1);
__delay_us(500); // delay to be at the midle
code[0] = RECEP;
__delay_ms(1);
code[1] = RECEP;
__delay_ms(1);
code[2] = RECEP;
__delay_ms(1);
code[3] = RECEP;
__delay_ms(1);
code[4] = RECEP;
__delay_ms(1);
code[5] = RECEP;
__delay_ms(1);
code[6] = RECEP;
__delay_ms(1);
code[7] = RECEP;
signal_precedent = 0;
PORTAbits.RA4 = change_out(PORTAbits.RA4);
}
else{}
}
else{ signal_precedent=1; }
}
}
/*
* Init frenquency
*/
void init_oscillator(void){
OSCCONbits.IRCF = 0b111; //8MHz
OSCCONbits.SCS = 0b00; //Oscillator mode defined by FOSC
OSCCONbits.IOFS = 1; //Frequency is stable
}
/*
* Change out signal
*/
unsigned change_out(unsigned OUT){
if( OUT==1 ) return 0;
else return 1;
}
/*
* Set code to default: 00000000
*/
void init_code(unsigned *code){
code[0] = 0;
code[1] = 0;
code[2] = 0;
code[3] = 0;
code[4] = 0;
code[5] = 0;
code[6] = 0;
code[7] = 0;
}

113
Makefile
Unescape View File

@ -0,0 +1,113 @@
#
# There exist several targets which are by default empty and which can be
# used for execution of your targets. These targets are usually executed
# before and after some main targets. They are:
#
# .build-pre: called before 'build' target
# .build-post: called after 'build' target
# .clean-pre: called before 'clean' target
# .clean-post: called after 'clean' target
# .clobber-pre: called before 'clobber' target
# .clobber-post: called after 'clobber' target
# .all-pre: called before 'all' target
# .all-post: called after 'all' target
# .help-pre: called before 'help' target
# .help-post: called after 'help' target
#
# Targets beginning with '.' are not intended to be called on their own.
#
# Main targets can be executed directly, and they are:
#
# build build a specific configuration
# clean remove built files from a configuration
# clobber remove all built files
# all build all configurations
# help print help mesage
#
# Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
# .help-impl are implemented in nbproject/makefile-impl.mk.
#
# Available make variables:
#
# CND_BASEDIR base directory for relative paths
# CND_DISTDIR default top distribution directory (build artifacts)
# CND_BUILDDIR default top build directory (object files, ...)
# CONF name of current configuration
# CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration)
# CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration)
# CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration)
# CND_PACKAGE_DIR_${CONF} directory of package (current configuration)
# CND_PACKAGE_NAME_${CONF} name of package (current configuration)
# CND_PACKAGE_PATH_${CONF} path to package (current configuration)
#
# NOCDDL
# Environment
MKDIR=mkdir
CP=cp
CCADMIN=CCadmin
RANLIB=ranlib
# build
build: .build-post
.build-pre:
# Add your pre 'build' code here...
.build-post: .build-impl
# Add your post 'build' code here...
# clean
clean: .clean-post
.clean-pre:
# Add your pre 'clean' code here...
# WARNING: the IDE does not call this target since it takes a long time to
# simply run make. Instead, the IDE removes the configuration directories
# under build and dist directly without calling make.
# This target is left here so people can do a clean when running a clean
# outside the IDE.
.clean-post: .clean-impl
# Add your post 'clean' code here...
# clobber
clobber: .clobber-post
.clobber-pre:
# Add your pre 'clobber' code here...
.clobber-post: .clobber-impl
# Add your post 'clobber' code here...
# all
all: .all-post
.all-pre:
# Add your pre 'all' code here...
.all-post: .all-impl
# Add your post 'all' code here...
# help
help: .help-post
.help-pre:
# Add your pre 'help' code here...
.help-post: .help-impl
# Add your post 'help' code here...
# include project implementation makefile
include nbproject/Makefile-impl.mk
# include project make variables
include nbproject/Makefile-variables.mk

5
README.md
Unescape View File

@ -0,0 +1,5 @@
This is an MPLAB project to PIC16F87. You should use MPLAB to compile it.
License CC-BY-NC-SA https://creativecommons.org/licenses/by-nc-sa/3.0/fr/

127
nbproject/Makefile-default.mk
Unescape View File

@ -0,0 +1,127 @@
#
# Generated Makefile - do not edit!
#
# Edit the Makefile in the project folder instead (../Makefile). Each target
# has a -pre and a -post target defined where you can add customized code.
#
# This makefile implements configuration specific macros and targets.
# Include project Makefile
ifeq "${IGNORE_LOCAL}" "TRUE"
# do not include local makefile. User is passing all local related variables already
else
include Makefile
# Include makefile containing local settings
ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk"
include nbproject/Makefile-local-default.mk
endif
endif
# Environment
MKDIR=mkdir -p
RM=rm -f
MV=mv
CP=cp
# Macros
CND_CONF=default
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
IMAGE_TYPE=debug
OUTPUT_SUFFIX=elf
DEBUGGABLE_SUFFIX=elf
FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
else
IMAGE_TYPE=production
OUTPUT_SUFFIX=hex
DEBUGGABLE_SUFFIX=elf
FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
endif
# Object Directory
OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE}
# Distribution Directory
DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE}
# Source Files Quoted if spaced
SOURCEFILES_QUOTED_IF_SPACED=
# Object Files Quoted if spaced
OBJECTFILES_QUOTED_IF_SPACED=
POSSIBLE_DEPFILES=
# Object Files
OBJECTFILES=
# Source Files
SOURCEFILES=
CFLAGS=
ASFLAGS=
LDLIBSOPTIONS=
############# Tool locations ##########################################
# If you copy a project from one host to another, the path where the #
# compiler is installed may be different. #
# If you open this project with MPLAB X in the new host, this #
# makefile will be regenerated and the paths will be corrected. #
#######################################################################
# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build
FIXDEPS=fixDeps
.build-conf: ${BUILD_SUBPROJECTS}
ifneq ($(INFORMATION_MESSAGE), )
@echo $(INFORMATION_MESSAGE)
endif
${MAKE} -f nbproject/Makefile-default.mk dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
MP_PROCESSOR_OPTION=16F87
# ------------------------------------------------------------------------------------
# Rules for buildStep: compile
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
else
endif
# ------------------------------------------------------------------------------------
# Rules for buildStep: assemble
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
else
endif
# ------------------------------------------------------------------------------------
# Rules for buildStep: link
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk
@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE}
${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G -mdist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.map -D__DEBUG=1 --debugger=none --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=-3 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,-osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" --memorysummary dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml -odist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED}
@${RM} dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.hex
else
dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk
@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE}
${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G -mdist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.map --double=24 --float=24 --opt=default,+asm,+asmfile,-speed,+space,-debug --addrqual=ignore --mode=free -P -N255 --warn=-3 --asmlist --summary=default,-psect,-class,+mem,-hex,-file --output=default,-inhx032 --runtime=default,+clear,+init,-keep,-no_startup,-osccal,-resetbits,-download,-stackcall,+clib --output=-mcof,+elf:multilocs --stack=compiled:auto:auto "--errformat=%f:%l: error: (%n) %s" "--warnformat=%f:%l: warning: (%n) %s" "--msgformat=%f:%l: advisory: (%n) %s" --memorysummary dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml -odist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED}
endif
# Subprojects
.build-subprojects:
# Subprojects
.clean-subprojects:
# Clean Targets
.clean-conf: ${CLEAN_SUBPROJECTS}
${RM} -r build/default
${RM} -r dist/default
# Enable dependency checking
.dep.inc: .depcheck-impl
DEPFILES=$(shell "${PATH_TO_IDE_BIN}"mplabwildcard ${POSSIBLE_DEPFILES})
ifneq (${DEPFILES},)
include ${DEPFILES}
endif

69
nbproject/Makefile-impl.mk
Unescape View File

@ -0,0 +1,69 @@
#
# Generated Makefile - do not edit!
#
# Edit the Makefile in the project folder instead (../Makefile). Each target
# has a pre- and a post- target defined where you can add customization code.
#
# This makefile implements macros and targets common to all configurations.
#
# NOCDDL
# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
# and .clean-reqprojects-conf unless SUB has the value 'no'
SUB_no=NO
SUBPROJECTS=${SUB_${SUB}}
BUILD_SUBPROJECTS_=.build-subprojects
BUILD_SUBPROJECTS_NO=
BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
CLEAN_SUBPROJECTS_=.clean-subprojects
CLEAN_SUBPROJECTS_NO=
CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
# Project Name
PROJECTNAME=IR-Receptor.X
# Active Configuration
DEFAULTCONF=default
CONF=${DEFAULTCONF}
# All Configurations
ALLCONFS=default
# build
.build-impl: .build-pre
${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
# clean
.clean-impl: .clean-pre
${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
# clobber
.clobber-impl: .clobber-pre .depcheck-impl
${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean
# all
.all-impl: .all-pre .depcheck-impl
${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build
# dependency checking support
.depcheck-impl:
# @echo "# This code depends on make tool being used" >.dep.inc
# @if [ -n "${MAKE_VERSION}" ]; then \
# echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
# echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
# echo "include \$${DEPFILES}" >>.dep.inc; \
# echo "endif" >>.dep.inc; \
# else \
# echo ".KEEP_STATE:" >>.dep.inc; \
# echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
# fi

36
nbproject/Makefile-local-default.mk
Unescape View File

@ -0,0 +1,36 @@
#
# Generated Makefile - do not edit!
#
#
# This file contains information about the location of compilers and other tools.
# If you commmit this file into your revision control server, you will be able to
# to checkout the project and build it from the command line with make. However,
# if more than one person works on the same project, then this file might show
# conflicts since different users are bound to have compilers in different places.
# In that case you might choose to not commit this file and let MPLAB X recreate this file
# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
# least once so the file gets created and the project can be built. Finally, you can also
# avoid using this file at all if you are only building from the command line with make.
# You can invoke make with the values of the macros:
# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...
#
PATH_TO_IDE_BIN=/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/
# Adding MPLAB X bin directory to path.
PATH:=/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/:$(PATH)
# Path to java used to run MPLAB X when this makefile was created
MP_JAVA_PATH="/opt/microchip/mplabx/v3.20/sys/java/jre1.8.0_65/bin/"
OS_CURRENT="$(shell uname -s)"
MP_CC="/opt/microchip/xc8/v1.35/bin/xc8"
# MP_CPPC is not defined
# MP_BC is not defined
MP_AS="/opt/microchip/xc8/v1.35/bin/xc8"
# MP_LD is not defined
# MP_AR is not defined
DEP_GEN=${MP_JAVA_PATH}java -jar "/opt/microchip/mplabx/v3.20/mplab_ide/mplab_ide/modules/../../bin/extractobjectdependencies.jar"
MP_CC_DIR="/opt/microchip/xc8/v1.35/bin"
# MP_CPPC_DIR is not defined
# MP_BC_DIR is not defined
MP_AS_DIR="/opt/microchip/xc8/v1.35/bin"
# MP_LD_DIR is not defined
# MP_AR_DIR is not defined
# MP_BC_DIR is not defined

73
nbproject/Package-default.bash
Unescape View File

@ -0,0 +1,73 @@
#!/bin/bash -x
#
# Generated - do not edit!
#
# Macros
TOP=`pwd`
CND_CONF=default
CND_DISTDIR=dist
TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging
TMPDIRNAME=tmp-packaging
OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
OUTPUT_BASENAME=IR-Receptor.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
PACKAGE_TOP_DIR=ir-receptor.x/
# Functions
function checkReturnCode
{
rc=$?
if [ $rc != 0 ]
then
exit $rc
fi
}
function makeDirectory
# $1 directory path
# $2 permission (optional)
{
mkdir -p "$1"
checkReturnCode
if [ "$2" != "" ]
then
chmod $2 "$1"
checkReturnCode
fi
}
function copyFileToTmpDir
# $1 from-file path
# $2 to-file path
# $3 permission
{
cp "$1" "$2"
checkReturnCode
if [ "$3" != "" ]
then
chmod $3 "$2"
checkReturnCode
fi
}
# Setup
cd "${TOP}"
mkdir -p ${CND_DISTDIR}/${CND_CONF}/package
rm -rf ${TMPDIR}
mkdir -p ${TMPDIR}
# Copy files and create directories and links
cd "${TOP}"
makeDirectory ${TMPDIR}/ir-receptor.x/bin
copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
# Generate tar file
cd "${TOP}"
rm -f ${CND_DISTDIR}/${CND_CONF}/package/ir-receptor.x.tar
cd ${TMPDIR}
tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/ir-receptor.x.tar *
checkReturnCode
# Cleanup
cd "${TOP}"
rm -rf ${TMPDIR}

59
nbproject/configurations.xml
Unescape View File

@ -0,0 +1,59 @@
<?xml version="1.0" encoding="UTF-8"?>
<configurationDescriptor version="62">
<logicalFolder name="root" displayName="root" projectFiles="true">
<logicalFolder name="HeaderFiles"
displayName="Header Files"
projectFiles="true">
</logicalFolder>
<logicalFolder name="LinkerScript"
displayName="Linker Files"
projectFiles="true">
</logicalFolder>
<logicalFolder name="SourceFiles"
displayName="Source Files"
projectFiles="true">
</logicalFolder>
<logicalFolder name="ExternalFiles"
displayName="Important Files"
projectFiles="false">
<itemPath>Makefile</itemPath>
</logicalFolder>
</logicalFolder>
<projectmakefile>Makefile</projectmakefile>
<confs>
<conf name="default" type="2">
<toolsSet>
<developmentServer>localhost</developmentServer>
<targetDevice>PIC16F87</targetDevice>
<targetHeader></targetHeader>
<targetPluginBoard></targetPluginBoard>
<platformTool>Simulator</platformTool>
<languageToolchain>XC8</languageToolchain>
<languageToolchainVersion>1.35</languageToolchainVersion>
<platform>2</platform>
</toolsSet>
<compileType>
<linkerTool>
<linkerLibItems>
</linkerLibItems>
</linkerTool>
<archiverTool>
</archiverTool>
<loading>
<useAlternateLoadableFile>false</useAlternateLoadableFile>
<parseOnProdLoad>false</parseOnProdLoad>
<alternateLoadableFile></alternateLoadableFile>
</loading>
</compileType>
<makeCustomizationType>
<makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled>
<makeCustomizationPreStep></makeCustomizationPreStep>
<makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled>
<makeCustomizationPostStep></makeCustomizationPostStep>
<makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID>
<makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines>
<makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile>
</makeCustomizationType>
</conf>
</confs>
</configurationDescriptor>

25
nbproject/private/configurations.xml
Unescape View File

@ -0,0 +1,25 @@
<?xml version="1.0" encoding="UTF-8"?>
<configurationDescriptor version="62">
<projectmakefile>Makefile</projectmakefile>
<defaultConf>0</defaultConf>
<confs>
<conf name="default" type="2">
<platformToolSN></platformToolSN>
<languageToolchainDir>/opt/microchip/xc8/v1.35/bin</languageToolchainDir>
<mdbdebugger version="1">
<placeholder1>place holder 1</placeholder1>
<placeholder2>place holder 2</placeholder2>
</mdbdebugger>
<runprofile version="6">
<args></args>
<rundir></rundir>
<buildfirst>true</buildfirst>
<console-type>0</console-type>
<terminal-type>0</terminal-type>
<remove-instrumentation>0</remove-instrumentation>
<environment>
</environment>
</runprofile>
</conf>
</confs>
</configurationDescriptor>

17
nbproject/project.xml
Unescape View File

@ -0,0 +1,17 @@
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://www.netbeans.org/ns/project/1">
<type>com.microchip.mplab.nbide.embedded.makeproject</type>
<configuration>
<data xmlns="http://www.netbeans.org/ns/make-project/1">
<name>IR-Receptor</name>
<creation-uuid>0d6fc8fa-4cc4-4517-808d-35cbc80b987c</creation-uuid>
<make-project-type>0</make-project-type>
<c-extensions/>
<cpp-extensions/>
<header-extensions/>
<asminc-extensions/>
<make-dep-projects/>
<sourceEncoding>UTF-8</sourceEncoding>
</data>
</configuration>
</project>
Write Preview
Loading…
Cancel
Save